Rural Drinking Water 9-parameter Tester

The HT-SC-9A series water quality analyzer and tester measures the light scattering or attenuation caused by insoluble particulate matter suspended in water (or transparent liquids), and can quantitatively characterize the content of such suspended particles.
Meanwhile, it can detect residual chlorine in water by using the tetramethylbenzidine or o-tolidine method, and also measure chlorine dioxide, ammonia nitrogen, pH, chroma and permanganate index (COD-Mn) in water.
Widely applicable to water plants, food, chemical, metallurgical, environmental protection, pharmaceutical and other industries, this instrument is a commonly used laboratory analytical device.

INTRODUCTION

SPECIFICATIONS

Application:
Widely used in water treatment plants, food industry, chemical industry, metallurgy, environmental protection, pharmaceutical industry and other sectors. It is a common laboratory instrument.

Product features:

Microcomputer with touch-sensitive keyboard for easy operation.

Automatic zero adjustment and 1- to -point automatic calibration.

Scattered dual-beam compensation circuit.

Standard optical glass sample cell with stronger interchangeability.

High resolution.

Measuring range	Turbidity		Color	Ammonia nitrogen	High ammonia nitrogen	COD (Mn)
	0-20 NTU	0-1000 NTU	0-100 PCU	0-10 mg/L	0-50 mg/L	0-10 mg/L
Resolution	0.01 NTU		0.01 PCU	0.01 mg/L
Indication error	±10%		±5% FS
	Residual chlorine	pH	Chlorine dioxide	Microorganism test strip		Odor & taste
	0-2.5 mg/L	See user manual	0-2.0 mg/L	See user manual		See instruction manual
Resolution	0.01 mg/L
Repeatability	≤2%
Indication error	±5% FS
Power supply	AC 220V 50Hz